Same-week chimney and fireplace bookings across the GTA

Flat, written pricing confirmed before a single tool comes out

WETT-certified, insured, background-checked technicians

Photo-documented safety report emailed after every visit

4.8 out of 5247 customer reviews · Google, Facebook & HomeStars combined

Newmarket, York Region

Furnace Repair in Newmarket

No heat? We diagnose and fix gas and electric furnaces the same day.

A furnace that quits in January is not a maintenance item, it is an emergency. Our gas-licensed technicians carry the ignition, control and blower parts that account for most Ontario furnace failures, so the majority of no-heat calls are resolved on the first visit.

(289) 906-3881

Furnace Repair in Newmarket

Send the symptom and your postal code — we'll confirm an arrival window.

No obligation. We never share your details.

Local context

Furnace Repair for Newmarket homes

Across Newmarket, furnace repair calls follow the local housing stock closely. The two Newmarket calls we take most are a gas fireplace that lights but shuts down after ten minutes, and a wood-burning masonry chimney downtown with a cracked crown letting water into the smoke chamber. Both are cheap to fix early and expensive to ignore.

We start every furnace call with a full combustion and safety check, not just a fix for the symptom you reported. That means testing the heat exchanger for cracks, verifying gas pressure against the manufacturer's spec, checking flue draft and confirming the limit and pressure switches are operating inside their ranges. A furnace that heats but vents improperly is more dangerous than one that will not start at all.

Once the cause is identified, you get a written price before we touch a part. If a repair does not make financial sense against the age and condition of the unit, we tell you plainly and show you the numbers rather than quietly replacing components on an appliance near the end of its life.

The failures we see cluster by age. Under eight years old, a no-heat call is usually a flame sensor, a pressure switch tripped by a blocked intake, or a condensate drain that has backed up and shut the unit down on a safety. Past twelve years, the same symptom is more often an inducer motor, a control board, or a heat exchanger that has finally opened up. Knowing which band your furnace is in changes what we test first and how much of your time we spend on it.

We also record what the furnace was doing before it stopped. Static pressure, temperature rise across the exchanger, gas manifold pressure and flame current are numbers, and numbers tell you whether the part that failed was the problem or a symptom of something upstream. A furnace that eats igniters is not an igniter problem — it is usually restricted airflow or a cracked exchanger cooking the ignition circuit, and replacing the igniter alone means you call us again in six weeks.

What the housing stock in Newmarket means for this job

Downtown Newmarket and the Quaker Hill blocks hold pre-1940 brick with original masonry chimneys, many of them unlined or lined with clay tile that has spalled. The 1980s-to-2000s Glenway, Stonehaven and Summerhill builds run zero-clearance factory fireplaces with B-vent or direct-vent terminations, and the newest Woodland Hill and Copper Hills homes are direct-vent gas with sealed combustion and condensing furnaces sharing the mechanical room. For furnace repair, that matters because the work concentrates on the furnace and its venting — and that is exactly what changes between a Historic Downtown / Main Street property and a newer build in Glenway Estates.

Timing in Newmarket

No-heat calls concentrate in the first hard cold snap of the season, when equipment that idled through the shoulder months is asked for full output overnight. undefined Newmarket sits high on the Oak Ridges Moraine side of York Region and reliably runs two to four degrees colder than downtown Toronto overnight, which means the heating season starts earlier, fireplaces get used as real heat rather than ambience, and creosote accumulates faster here than it does closer to the lake.

What it costs here

The failed component sets the floor and the age of the unit sets the ceiling. Parts still in production are inexpensive; obsolete boards and inducers for discontinued models are not. Most Newmarket lots allow driveway parking and direct ladder access, which keeps sweep and inspection pricing at the low end. Cost climbs on the tall three-storey Stonehaven and Copper Hills elevations where a roof harness or lift is required, and on downtown heritage brick where repointing has to match the original mortar.

Permits and jurisdiction

Building permits and chimney or fireplace-related structural work fall under the Town of Newmarket, gas appliances are governed by TSSA province-wide, and solid-fuel installs need WETT documentation for your insurer. We file the paperwork and send you the certificate.

Call now, or book it in?

Call now

  • No heat with outdoor temperatures below freezing
  • Any carbon monoxide alarm activation
  • A burning or electrical smell from the furnace
  • Visible soot around the burner compartment

Can be scheduled

  • Short cycling but still holding temperature
  • Louder-than-usual blower
  • Uneven heat between floors
  • Filter clogging faster than it used to

How a Newmarket visit runs

  1. 1Book & confirmTell us the symptom and your postal code. We confirm an arrival window, not an all-day wait.
  2. 2DiagnoseFull electrical, gas pressure, draft and safety-control test to find the actual cause.
  3. 3QuoteWritten, itemised price for parts and labour before any work begins.
  4. 4Repair & verifyWe fix it, then re-run the unit through a full heat cycle and record the readings.
  5. 5Safety reportYou get a written summary of every reading and anything to watch for next season.

What affects furnace repair pricing in Newmarket

  • Which component failed — an igniter is a fraction of the cost of an inducer motor or control board
  • Whether the part is stocked on the truck or has to be ordered for an older model
  • Age of the furnace and whether parts are still manufactured
  • After-hours or emergency scheduling
  • Whether the failure damaged secondary components such as the limit switch or blower

FAQ

Furnace Repair questions from Newmarket homeowners

How long does a furnace repair take?

Most repairs are completed in 60 to 120 minutes, including diagnosis and a full safety verification cycle. Repairs that need a special-order part for an older unit typically take two visits.

Is it worth repairing a furnace over 15 years old?

It depends on the failed component. A $200 igniter on a 16-year-old furnace that is otherwise sound is worth doing. A cracked heat exchanger or a failed control board on the same unit usually is not. We give you the repair cost, the replacement cost and the expected remaining life so you can decide with real numbers.

Why does my furnace turn on and off every few minutes?

Short cycling is most often a dirty filter restricting airflow, a flame sensor coated in oxide, a blocked flue, or an oversized furnace for the space. The first two are inexpensive fixes. We test all four before recommending anything.

Do you handle emergency no-heat calls?

Yes. No-heat calls are prioritised ahead of routine maintenance, and we run extended hours through the Ontario heating season.

Is my furnace still under warranty?

Most manufacturers cover heat exchangers for 10 to 20 years and other parts for 5 to 10 years, and the coverage usually survives a change of homeowner. We look the model and serial up before quoting so you are not paying for a part the manufacturer owes you.

Does the age of my home change what usually fails on a furnace here?

Downtown Newmarket and the Quaker Hill blocks hold pre-1940 brick with original masonry chimneys, many of them unlined or lined with clay tile that has spalled. The 1980s-to-2000s Glenway, Stonehaven and Summerhill builds run zero-clearance factory fireplaces with B-vent or direct-vent terminations, and the newest Woodland Hill and Copper Hills homes are direct-vent gas with sealed combustion and condensing furnaces sharing the mechanical room. On a furnace repair visit in Historic Downtown / Main Street, Glenway Estates, Stonehaven or anywhere else in Newmarket, we work from what the house actually is rather than a standard checklist — the furnace and its venting gets assessed on the property, and you get the readings in writing.

When is the worst time to be without heat here, and how fast can you get out?

No-heat calls concentrate in the first hard cold snap of the season, when equipment that idled through the shoulder months is asked for full output overnight. Newmarket sits high on the Oak Ridges Moraine side of York Region and reliably runs two to four degrees colder than downtown Toronto overnight, which means the heating season starts earlier, fireplaces get used as real heat rather than ambience, and creosote accumulates faster here than it does closer to the lake. We cover Newmarket from Historic Downtown / Main Street through Stonehaven, and also serve 4 neighbouring municipalities, so scheduling outside a demand spike usually means a same-week window.

Pricing

How much does this cost in Newmarket?

Typical range is $180 – $1,200 per repair. Get a number for your own home in about a minute with our instant estimator.

Furnace Repair in Newmarket, booked today

Call for the fastest response, or send a request and we'll confirm your arrival window.

(289) 906-3881
Call Now